hey guys, does anybody got datatool system 3 alarm/imobiliser on xb
i have some problems i can't understand. when i arm alarm(or automatic arm) it comes on/off screaming about 10 times for about 5-10 minutes and then goes normal
if i enter servise/valet mode it comes to diagnostics mode itself with 4 beeps(movement detection, when no body touch it) every 15 secs. if i leave it without movement sensor (press long button) alarm don't come on. if i leave bike over night it gives me diferent very long beep when disarming, but it does it ones, then normal again.
anybody knows how to reset system completely or maybe somebody have wiring scheme for bastard thing
i'm going to 2500miles trip to scandinavia very soon and don't want to get stuck in the middle of nowhere. if it's fucked i'll remove it all together to save myself hasle on my trip.
thanks for any help in advance

ive got 1, rubbish arent they. Mine went funny like that about 2 weeks after i bought the bike, id arm the alarm, walk away and about 30 seconds later the alarm would go off, then be fine until the next time you dis-armed and re-armed the system, i got about a month then the alarm completely ballsed up and wouldnt dis-arm, i had to get the dealer i bought it from to come and collect the bike in their van, and they, luckily, fitted a new 1 free of charge.

went to rome last december and came home to find loads of notes saying it had been going off constantly for 3 days, it carried on going off randomly for the next week then suddenly it was fine. if i was you id remove the alarm and bin it asap, i certainly will be as soon as i get the money, (dealer quoted between £200-£300 to remove it)

datatool alarm seems to help alot on insurance, it halved my premium, but they seem to have a mind of their own.

that's a problem. i don't want to pay dealer hell lot of dosh to take it of and i don't have any wiring diagram so i could do it myself. that alarm starting to piss me off. i tried to remove battery and all fuses to reset it, but had no joy

viewtopic.php?f=7&t=5868&start=0

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

oh hahaha maz i didnt choose a datatool, and when i finally get rid of the datatool ill have a look at those meta alarms.

out of interest how much would you charge to remove an alarm?

or is there a couple of wires i could just cut to disable the datatool

Datatool is a Cat1 alarm, so has 2x immobilise cicuits and a shit load of other connections, non of the wires are colour coded ie. all black.
It takes me around 6 hours to fit one properly and would take aprox 4 hours to remove and make good.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

what a mother fuckin' bastard. looks like i will have to pay to get it removed. i can't go for a 2500 mile trip abroad with this shit.

ah ok then.... no quick fix then, start saving for a new 1!

is there any way of reseting alarm itself? i looked at datatool website and it says to remove alarm's battery and inline fuse. i'm bit comfused with the fuse 'cause it is after alarm and kills only fuel pump(could be ignition as well) and i can't open bastard box without silly star key with hole in the centre

I've had a couple of Datatool alarms in the past. Both were complete shite.

Yes me as well. The one on the RSV-R was better but still played up and it did sap the battery no matter what they say. It also did not stop it being nicked. They are a waste of time and money IMO.

If you must, as some do, need it for insurance replace it. Otherwise have it removed. I would seriously advise that you get someone who can do this right. Its got a lot of wires and a bad joint WILL come back and bit you one day.

I would go to if I were you. If your going on a big trip he could go over your bike at the same time.

Sounds good to me . Best of luck Dude and have a great trip.

When was it you ran to the phone to call the police cos somebodies alarm was going off? Waste of time. Mrs has got one, dunno which but I know it is much better with duct tape over the speaker

Good luck on ya trip, sounds interesting.

N.

i try this first before paying money i don't have to remove it. bastard thing was in the bike when i bought it, so it wasn't my choice to have it.
http://www.datatool.co.uk/pdfs/system3_ds.pdf
hopefully this will help. if not i will kill that thing with a hammer.

Mrs is on about changing her bike after the run out today, the one she is interested in has one of these alarms so that link may come in handi, cheers

Nate.

is it to stop moisture getting inside alarm, or to to lover level of stupid unnecessary noise


wanna join
1/07/2010-11/07/2010 from brum to harwich, over damn sea to denmark, across it to sweden, up to oslo(norway), round norway coast towards bergen, down to kristiansand (south norway), back to oslo, back to bottom of sweden, back to denmark, in ferry, back here on sunday 11/07, back to brum (about 2300 miles all together). sleeping in tents, drinking shit loads of beer and whiskey, eatin' baked beans and corned beef and etc. rough cocts about 500-600£