.......are shite
Last weekend I sorted the valve shims on my TRX. I've got a couple of sets of Metric feeler gauges and noticedone set would push under the can quite snuggy while the other set wouldn't. I put a Micrometer on the expensive set and they were fine. When I miked the cheap set, they were miles out. Makes me wonder how clearances I've feked up in the past

_________________
If your dreams don't scare you, they are not big enough.

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

......but fag papers were always spot on for timing magnetos

_________________
If your dreams don't scare you, they are not big enough.

...a couple of thou !!!

_________________
Mithered ta death.
92 MB
96 S2T
98 S1W
00 M2
01 X1
03 P3
10 CR

.......and gapping Bantam points....

....not to mention skinning up, so I won't

_________________
Wear the fox hat

Gapping You'd need half a pack of Rizlas for that that's what the cardboard of a fag packet is for

_________________
If your dreams don't scare you, they are not big enough.

The rizla is for finding the moment the points open up. The packet is doubled up to measure plug gap.

Cheers, Richard.

There's an echo in here

_________________
If your dreams don't scare you, they are not big enough.