It is currently 01 Dec 2024 06:52

Unanswered topics | Active topics


Home » Board index » The Bike Bit » Buell Chat

All times are UTC



Post new topic  Reply to topic  Page 2 of 7
  [ 93 posts ]  Go to page Previous 1 2 3 4 5 … 7 Next
  Print view Previous topic | Next topic 
Author Message
wobbly
 Post subject: Re: ECM Tuning..
PostPosted: 08 May 2010 06:54 
spen wrote:
is it just me that thinks all this computerised bike onboard brain stuff is bollocks :?:

Needing a lap top to sort a bike isn't much fun when you're stranded.... oh for the days when you set your timing with a Rizla paper....... ;)

But then again, what do I know about bikes....... :?: :(



:yt: and a piece of rizla packet doubled up for the plug gap.

Cheers, Richard. :old:
Top
   
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 08 May 2010 08:45 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
pash wrote:
Philgood wrote:
As my Buell race exhaust can has no active valve, can I remove the cable and control unit in the airbox?

:worthy:


Yes, and mute the error reporting. See the How To. I may even update it for 08/09/10 bikes...



Thanks Pash...mine is an 08 bike ..
Top
  Send private message  
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 26 May 2010 19:43 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
pash wrote:
Philgood wrote:
As my Buell race exhaust can has no active valve, can I remove the cable and control unit in the airbox?

:worthy:


Yes, and mute the error reporting. See the How To. I may even update it for 08/09/10 bikes...


Just received my cable from Mike at Xopti..

Now I'm confused..I emailed Gunter for a copy of ecmspy and he replied there is no version of ecmspy for >08 models..

???? :headbang:
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: ECM Tuning..
PostPosted: 26 May 2010 21:04 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
So, the question is, what do you want to do with ECMSpy?

There are plenty of solutions...

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 26 May 2010 21:19 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
pash wrote:
So, the question is, what do you want to do with ECMSpy?

There are plenty of solutions...


Cancel the exhaust valve actuator fault reporting..
Stop my Buell race can popping on over run..
And Improve idle and get the engine to run smoothly..like yours maybe!

Thanks! :sun:
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: ECM Tuning..
PostPosted: 26 May 2010 21:29 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Go here - http://www.ecmspy.com/download.shtml - and download ECMRead

Then go here - http://www.tunerpro.net/downloadApp.htm - and download TunerPro

Back in a bit...

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: ECM Tuning..
PostPosted: 26 May 2010 21:31 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
And get yourself Mono Runtime Environment here - http://www.go-mono.com/mono-downloads/download.html - otherwise ECMRead wont work...

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 27 May 2010 10:08 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
pash wrote:
When you have got all this working, let me know, then we can start work ;)


All software loaded..kettle's on! ready to go.. :sun:
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: ECM Tuning..
PostPosted: 27 May 2010 10:38 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Using your cable, use ECMRead to get your EEPROM data...

I am at work and have no access to it at the moment, so you are going to have to try and figure out how to get it working.

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 27 May 2010 14:21 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
pash wrote:
Using your cable, use ECMRead to get your EEPROM data...

I am at work and have no access to it at the moment, so you are going to have to try and figure out how to get it working.


Didnt work at first but realised I was using wrong com port and needed ignition on!
Downloaded a file called BUEYDOL 403-20-08..
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: ECM Tuning..
PostPosted: 27 May 2010 15:27 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
Cool, so that means you have a BUEYD firmware.

For that firmware, go here - http://www.ecmspy.com/cgi-bin/ecm.cgi?ecm=89 - and export the TunerPro V4 Bin-Definition to you machine.

Then, start TunerPro up, open the XDF file (I can't see TunerPro from here but I think it is the second menu item along from the left), then open the binary file (first menu item - in the dialogue box to open the file, make sure you select the *.*), BUEYDOL 403-20-08.xpr.

Then, you will see all the tables and constants int he windows on the left...

Let us know when you get that far...

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 27 May 2010 18:57 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
pash wrote:
Cool, so that means you have a BUEYD firmware.

For that firmware, go here - http://www.ecmspy.com/cgi-bin/ecm.cgi?ecm=89 - and export the TunerPro V4 Bin-Definition to you machine.

Then, start TunerPro up, open the XDF file (I can't see TunerPro from here but I think it is the second menu item along from the left), then open the binary file (first menu item - in the dialogue box to open the file, make sure you select the *.*), BUEYDOL 403-20-08.xpr.

Then, you will see all the tables and constants int he windows on the left...

Let us know when you get that far...


Ok I loaded the xdf files from Ecmspy into tuner-pro for my version of firmware.. then clicked on file/open bin then found the xpr files I downloaded from my eprom..these files are [I hope!] now showing in the left hand column of the Tuner-pro application.. :ill:
Top
  Send private message  
Reply with quote  
pash
 Post subject: Re: ECM Tuning..
PostPosted: 27 May 2010 19:04 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
So you wanted to:

Philgood wrote:
Cancel the exhaust valve actuator fault reporting..
Stop my Buell race can popping on over run..
And Improve idle and get the engine to run smoothly..like yours maybe!


So lets start with the first issue; in the Flags/Switches window, scroll down till you find Error Mask Byte 4: AMCxxx

Double click all the AMC related ones and untick the tick box...

Then Save Bin As.... under a different name...

MAKE SURE YOU HAVE YOUR ORIGINAL EEPROM CONTENT SAVED SOMEWHERE SAFE

Since we are doing one thing at a time, use ECMRead to burn the EEPROM content back to your ECM...

_________________
08 Specialized Langster
Top
  Send private message  
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 27 May 2010 22:47 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
Slight delay with progress..borrowed her laptop as mine is a mac..blue screen has appeared and all is looking grim!!
Normal service will be resumed asap... :roll:
Top
  Send private message  
Reply with quote  
Philgood
 Post subject: Re: ECM Tuning..
PostPosted: 28 May 2010 20:14 
Offline
User avatar

Joined: 17 Aug 2009 20:16
Posts: 111
Location: West Sussex
pash wrote:
So you wanted to:

Philgood wrote:
Cancel the exhaust valve actuator fault reporting..
Stop my Buell race can popping on over run..
And Improve idle and get the engine to run smoothly..like yours maybe!


So lets start with the first issue; in the Flags/Switches window, scroll down till you find Error Mask Byte 4: AMCxxx

Double click all the AMC related ones and untick the tick box...

Then Save Bin As.... under a different name...

MAKE SURE YOU HAVE YOUR ORIGINAL EEPROM CONTENT SAVED SOMEWHERE SAFE

Since we are doing one thing at a time, use ECMRead to burn the EEPROM content back to your ECM...


All done!..unticked 4 AMC boxes and sent new files to ecm..yellow warning light goes out very soon after ignition on now.. :sun:
Top
  Send private message  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 2 of 7
  [ 93 posts ]  Go to page Previous 1 2 3 4 5 … 7 Next

Home » Board index » The Bike Bit » Buell Chat

All times are UTC

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited