It is currently 01 May 2025 01:28

Unanswered topics | Active topics


Home » Board index » The Bike Bit » Technical Forum

All times are UTC+01:00



Post new topic  Reply to topic  Page 20 of 32
  [ 472 posts ]  Go to page Previous 1 … 18 19 20 21 22 … 32 Next
  Print view Previous topic | Next topic 
Author Message
kevmean
 Post subject: Re: new exhaust
PostPosted: 20 May 2010 19:27 
Offline
User avatar

Joined: 06 May 2009 17:28
Posts: 7259
Current ride: 1991 RS1200 westwind
albert666 wrote:
tonight i have noise tested the latest can, which i have been running in for a week now, it measured 104db @5000rpm, idles @ 98db
for a comparison i tried a scorpion 'chambered' can from a cbr600rr as its about the same size as my oval can
the scorpion idled @ 105db!!!!!!!!
i know it was designed for an i-4 but jesus!
a chap over the road from work has a bike breakers, he also owns an r1 with aftermarket cans, he was noise tested recently at a track at 103db,
his friend with a duke with termi's measured 120db
needless to say he didn't get on track
so thats where we're at
i tried an additional silencer but it spoils the lines of the bike and didn't really do diddly squat towards noise reduction.
i think 104-105 is where its gonna end up :headbang:


My X1 with race can made 116db..........................i think the standard 1125 can is 102 according to the vin plate...so 104 /105 isn't bad at all for such a small can :yup:

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.
Top
  Send private message  
Reply with quote  
wkd1
 Post subject: Re: new exhaust
PostPosted: 20 May 2010 19:32 
Offline
User avatar

Joined: 13 May 2009 10:52
Posts: 123
albert666 wrote:
i'll make you a baffle, and post it to you :)



:worthy:

thanks


Wkd1

_________________
the most important things in life, aren't things
Top
  Send private message  
Reply with quote  
albert666
 Post subject: Re: new exhaust
PostPosted: 20 May 2010 19:37 
Offline
Resident Bender
User avatar

Joined: 20 Sep 2009 19:28
Posts: 1601
Current ride: EBR 1190RX
Location: banbury uk
did you cut the tailpipe down on the reverso,
just so i know what i'm aiming to make :)

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com
Top
  Send private message  
Reply with quote  
wkd1
 Post subject: Re: new exhaust
PostPosted: 20 May 2010 21:11 
Offline
User avatar

Joined: 13 May 2009 10:52
Posts: 123
yes... im home on Monday i will try to get a pic or measurement?

had to do it twice, first time wasnt enough and led to a brown trouser moment on a roundabout.. :oooops:

Wkd1

_________________
the most important things in life, aren't things
Top
  Send private message  
Reply with quote  
chris(madrid)
 Post subject: Re: new exhaust
PostPosted: 21 May 2010 08:00 
Offline
User avatar

Joined: 15 May 2009 17:34
Posts: 3567
Location: The borders of insanity
kevmean wrote:
My X1 with race can made 116db
That's good. All I can manage in the V&H is 111.

_________________
Sept 2017. Email will find me.
Top
  Send private message  
Reply with quote  
norrie
 Post subject: Re: new exhaust
PostPosted: 24 May 2010 18:43 
Offline
User avatar

Joined: 06 May 2009 14:19
Posts: 1356
Current ride: Cagiva Raptor 650
Location: Scottish Borders
You said the new can makes 104db at 5K and 98 at idle.
Have you tested the standard can at 5K and idle?
How about making a twin can like the Free Spirits one?

Image
Image

_________________
Norrie.
Top
  Send private message  
Reply with quote  
albert666
 Post subject: Re: new exhaust
PostPosted: 24 May 2010 21:57 
Offline
Resident Bender
User avatar

Joined: 20 Sep 2009 19:28
Posts: 1601
Current ride: EBR 1190RX
Location: banbury uk
the only prob i have now is that my standard can isn't standard anymore, but if it says 102 db@5000rpm on the headstock
then 104 from a straight thru design isn't really that bad.
i'm currently working on the 'final solution'
hopefully i can get it finished this week then hopefully book a dyno day with tubbs again :)

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com
Top
  Send private message  
Reply with quote  
norrie
 Post subject: Re: new exhaust
PostPosted: 24 May 2010 22:04 
Offline
User avatar

Joined: 06 May 2009 14:19
Posts: 1356
Current ride: Cagiva Raptor 650
Location: Scottish Borders
Looking forward to it mate and good luck.

_________________
Norrie.
Top
  Send private message  
Reply with quote  
sportster_mann
 Post subject: Re: new exhaust
PostPosted: 25 May 2010 09:24 
I have a bog-standard exhaust if you need one - both of my bikes are still running stock exhausts and I also have a spare !
Top
   
Reply with quote  
norrie
 Post subject: Re: new exhaust
PostPosted: 25 May 2010 16:11 
Offline
User avatar

Joined: 06 May 2009 14:19
Posts: 1356
Current ride: Cagiva Raptor 650
Location: Scottish Borders
I e-mailed Free Spirits to ask how loud there exhausts were and they sent me this.

Image

_________________
Norrie.
Top
  Send private message  
Reply with quote  
albert666
 Post subject: Re: new exhaust
PostPosted: 25 May 2010 18:04 
Offline
Resident Bender
User avatar

Joined: 20 Sep 2009 19:28
Posts: 1601
Current ride: EBR 1190RX
Location: banbury uk
sportster_mann wrote:
I have a bog-standard exhaust if you need one - both of my bikes are still running stock exhausts and I also have a spare !

are you collecting them??
cheers for the offer, i've made bigger dia primaries on mine now as well so i can't get the standard one on.

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com
Top
  Send private message  
Reply with quote  
albert666
 Post subject: Re: new exhaust
PostPosted: 26 May 2010 21:19 
Offline
Resident Bender
User avatar

Joined: 20 Sep 2009 19:28
Posts: 1601
Current ride: EBR 1190RX
Location: banbury uk
Image
Image
this is about a bigger volume silencer i can get on.
a lot of work involved with this one too
not noise tested it yet, ran out of time tonight

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com
Top
  Send private message  
Reply with quote  
chris(madrid)
 Post subject: Re: new exhaust
PostPosted: 27 May 2010 07:50 
Offline
User avatar

Joined: 15 May 2009 17:34
Posts: 3567
Location: The borders of insanity
End of page 18 LOOKS nicer. :coat:

_________________
Sept 2017. Email will find me.
Top
  Send private message  
Reply with quote  
Beef
 Post subject: Re: new exhaust
PostPosted: 27 May 2010 16:29 
Offline
has it got a pulse?
User avatar

Joined: 06 May 2009 15:47
Posts: 2565
Current ride: FUBAR...Enough said!
Location: Reading
That looks smart as Al :yup:

_________________
FUBAR pilot

You only need two bikes in life-an S1 and a Multistrada!


Top
  Send private message  
Reply with quote  
albert666
 Post subject: Re: new exhaust
PostPosted: 27 May 2010 20:34 
Offline
Resident Bender
User avatar

Joined: 20 Sep 2009 19:28
Posts: 1601
Current ride: EBR 1190RX
Location: banbury uk
the noise test results were pretty much the same :(
around 104-105
gonna get some dyno figures on a few bits next week hopefully :)

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com
Top
  Send private message  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 20 of 32
  [ 472 posts ]  Go to page Previous 1 … 18 19 20 21 22 … 32 Next

Home » Board index » The Bike Bit » Technical Forum

All times are UTC+01:00

Who is online

Users browsing this forum: Bing [Bot] and 58 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited