It is currently 12 Dec 2024 12:45

All times are UTC




Post new topic  Reply to topic  [ 28 posts ]  Go to page 1 2 Next
Author Message
 Post subject: It's Alive
PostPosted: 15 Mar 2015 19:53 
Offline

Joined: 07 May 2009 21:27
Posts: 1354
Current ride: XB12s,S1WL, Triumph
Location: Glossop in't th'hills
As of this afternoon the S1 is alive and kicking. It seems ages ago i started this project and it was sometime late november that the frame came off and was sat on the workmate in the back garden whilst i chopped unwanted bits off it. A piece of cro mo 4130 was the tigged in to the frame (Cheers for that info Bob X1 glider) where the missing spar should be and a few other welding mods done whilst it was in the workshop, then it was off for powder coating. As the engine was on the bench it was time for the cam case chop, lucky hands oil pump drive gear done, oil line re-route, and rocker boxes polished. Now while maz can do this with his eyes closed this was my first foray into the engine and it was with some trepidation that all the pushrods,cams etc came out. With a workshop manual, Adams clear and concise directions in the 'how to' section :yup: and numerous brews/chats with :maz: it all went straight forward. Then the brakes went on as i decided to send my rear shock back to AST for a damper service and powder coated spring. It went there on the 4th of dec and they kept it three long months, lie followed lie as they fobbed me off with excuse after excuse as to the hold up with the spring. Eventually it came back with the damper serviced and the old chipped spring still on, The only good thing to come out of this was it was FOC. The service they provide is appalling. Whilst waiting for said rear shock the rear pulley was sent to germany for a bit of machining. This finally turned up wednesday and was the last piece of the jigsaw. So the last couple of days everything has been screwed back together, fresh oils and filter, fresh fuel and the battery charged up and today it burst into life. You were right maz, it sounded like a biscuit tin full of nuts and bolts till the lifters filled up then it all sounded as it should. Tonight i'll sleep a very peaceful sleep :D


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 19:59 
Offline
proff. patpending
User avatar

Joined: 06 May 2009 20:20
Posts: 14705
Current ride: Victoria Sponge
Location: Bristol - Gateway to all things good
:yup:

_________________
08 Specialized Langster


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 20:08 
Offline
User avatar

Joined: 06 May 2009 19:42
Posts: 3152
Current ride: M2 Razorback
Location: Mouth of the Port in the Shire of Hamp
8-)
Let's see it then... lOl

_________________
'98 M2 Razorback, it's a keeper.


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 20:14 
Offline
Think Pink
User avatar

Joined: 07 Jun 2010 00:37
Posts: 3777
Current ride: Awesome Ulysses & X1
Location: balderton, newark
DaveH wrote:
As of this afternoon the S1 is alive and kicking. It seems ages ago i started this project and it was sometime late november that the frame came off and was sat on the workmate in the back garden whilst i chopped unwanted bits off it. A piece of cro mo 4130 was the tigged in to the frame (Cheers for that info Bob X1 glider) where the missing spar should be and a few other welding mods done whilst it was in the workshop, then it was off for powder coating. As the engine was on the bench it was time for the cam case chop, lucky hands oil pump drive gear done, oil line re-route, and rocker boxes polished. Now while maz can do this with his eyes closed this was my first foray into the engine and it was with some trepidation that all the pushrods,cams etc came out. With a workshop manual, Adams clear and concise directions in the 'how to' section :yup: and numerous brews/chats with :maz: it all went straight forward. Then the brakes went on as i decided to send my rear shock back to AST for a damper service and powder coated spring. It went there on the 4th of dec and they kept it three long months, lie followed lie as they fobbed me off with excuse after excuse as to the hold up with the spring. Eventually it came back with the damper serviced and the old chipped spring still on, The only good thing to come out of this was it was FOC. The service they provide is appalling. Whilst waiting for said rear shock the rear pulley was sent to germany for a bit of machining. This finally turned up wednesday and was the last piece of the jigsaw. So the last couple of days everything has been screwed back together, fresh oils and filter, fresh fuel and the battery charged up and today it burst into life. You were right maz, it sounded like a biscuit tin full of nuts and bolts till the lifters filled up then it all sounded as it should. Tonight i'll sleep a very peaceful sleep :D

FOOKING GOOD MAN .......first time is the worst :D

_________________
IF IT BLEEDS WE CAN KILL IT ,THIS STUFF WILL MAKE YOU A GODDAM SEXUAL TYRANASURUS ,YOUVE BEEN PUSHING TOO MANY PENCILS DILLON .GET TO THE CHOPPER


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 20:16 
Offline

Joined: 07 May 2009 21:27
Posts: 1354
Current ride: XB12s,S1WL, Triumph
Location: Glossop in't th'hills
I struggle trying to get photo's onto the forum. But if the sun is out on the 4th of april it's getting ridden down to the Krazy Horse meet. Those who have seen it before it's now cleaner whiter and shinier than ever :D


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 20:49 
Offline
User avatar

Joined: 05 May 2009 20:00
Posts: 10978
Current ride: X1 2001
Location: southampton
:yup:

_________________
Feros Ferio


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 21:26 
Offline
User avatar

Joined: 06 May 2009 21:29
Posts: 1485
Nice one pal :yup:

Andy


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 22:32 
Offline
User avatar

Joined: 20 Oct 2009 07:13
Posts: 1056
Current ride: 2001 X1, EBR 1190SX
Location: West Lothian
DaveH wrote:
Those who have seen it before it's now cleaner whiter and shinier than ever :D

Not sure that is actually possible! We will need to look at it through a welding screen 8-)

_________________
Go big!! Or go Home!!


Top
 Post subject: Re: It's Alive
PostPosted: 15 Mar 2015 23:22 
Offline
User avatar

Joined: 08 May 2009 19:54
Posts: 2467
Current ride: 1999 X1
Location: Texas, Gerrards Cross
rik wrote:
8-)
Let's see it then... lOl

'zaktly. ;)

_________________
Bob Krzeszkiewicz
2012 XR1200X - 2011 Kawasaki Z1000SX - 1999 Buell X1


Top
 Post subject: Re: It's Alive
PostPosted: 16 Mar 2015 17:04 
Offline

Joined: 30 Jan 2010 23:27
Posts: 341
Location: north east england
Come on Dave pictures especially all the gay bits :yup:


Top
 Post subject: Re: It's Alive
PostPosted: 16 Mar 2015 17:17 
Offline
User avatar

Joined: 06 May 2009 18:54
Posts: 2129
Current ride: Ducati Monster 950+
Location: West Lothian, Bonnie Scotland
Good skills Dave. Your bikes are by far the cleanest I've ever seen :shock:

I'm sure it'll be hoofin :yup:

_________________
Better to Burn Out Than Fade Away

In the garage -

2001 X1
KTM390 Duke
Ducati 950 Monster +
CCM Spitfire Scrambler


Top
 Post subject: Re: It's Alive
PostPosted: 16 Mar 2015 17:29 
Offline
User avatar

Joined: 23 Jun 2009 12:55
Posts: 658
Current ride: S1W,Hype,HP2,R1200RS
Location: Preston, Lancs
:yup:


Top
 Post subject: Re: It's Alive
PostPosted: 16 Mar 2015 18:00 
Offline

Joined: 08 Jun 2010 16:34
Posts: 768
Current ride: m2 cyclone
Location: leicester
will you find krazy horse any quicker than you did black bear last year? :ner: :couch:


Top
 Post subject: Re: It's Alive
PostPosted: 16 Mar 2015 18:56 
Offline

Joined: 07 May 2009 21:27
Posts: 1354
Current ride: XB12s,S1WL, Triumph
Location: Glossop in't th'hills
coco wrote:
will you find krazy horse any quicker than you did black bear last year? :ner: :couch:

Ha Ha Ha. I'm setting off the day before. Just to be on the safe side :run:


Top
 Post subject: Re: It's Alive
PostPosted: 16 Mar 2015 19:03 
Offline

Joined: 07 May 2009 21:27
Posts: 1354
Current ride: XB12s,S1WL, Triumph
Location: Glossop in't th'hills
v2bul wrote:
Come on Dave pictures especially all the gay bits :yup:

I'll see what i can do friday afternoon with the camera and computer. i'm better with spanners though lOl


Top
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 28 posts ]  Go to page 1 2 Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited