I have just removed noid and harness fix on 1125R. When I removed the noid I fitted the resistor so I think that's ok. When I turn key on I get a come error flash up then disappear. Would I be right in thinking that when the harness was fitted that they would have flashed the ECM to take the harness into account and that's what's now throwing up the comms error when I turn the key?.

If this is the case would getting a lead and ecm spy sort this?.

Why not reconnect the solenoid and see if that is the issue?

_________________
08 Specialized Langster

This may interest you:

viewtopic.php?f=17&t=5066

_________________
08 Specialized Langster

Thanks Pash,

Will go back up to the loft to get it and plug back in and see. When comms error comes up is the problem logged in the ecm so that spy could tell me exactly why it's coming up or have I got the wrong end of the stick... On my car when I plug in vagcom it pulls up the error codes so I know exactly what's wrong and can then clear them.

Hmmm, not sure, I would have to check...

_________________
08 Specialized Langster