Hi Folks.

Not sure if this has been mentioned before but if your sick of undoing the 10mm nuts to get your front seat off. Aprilia Mille seat pins fit fine & are Quick release with an R clip. I had to make a petrol pipe spacer for the Mille ones.

So I made my own pair easy enough by cutting the top off a 30 mm bolt, I used stainless again by God, take my life in my hands I do. Secure this with a 10mm nut when you have it at the correct length to fit through your seat, Take it out, drill a hole in it to fit an & R clip, put a washer on & fit the R clip. Hey presto Qr seat pins. Obviously take time to file etc to make it as neat as you want. You can also put a flat on the bolt as it makes drilling easier & you can see where the R pin fits better when you're fumbling under the seat flap.

Thanks folks.

_________________
Ride Safe & Stay between the hedgerows.

Yeah did this about 9 years ago

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

moved to Buell chat , from Technical

_________________
Feros Ferio

Works a treat doesn't it? Had a feeling it had been done, sorry to go over old ground.

_________________
Ride Safe & Stay between the hedgerows.

Same with mine I never could understand why they bolted the seat down

_________________
2001 X1 2009 1125CR 2006 Uly X3 2010 Uly a fully Maz'd S1 and a 1991 RS1200 Westwind.

What do you need quick access to?

_________________
08 Specialized Langster

Sandwiches

_________________
Buell X1
Buell xb12s
Buell 1125r
Ebr 1190rx
Bimota Db7
Norton v4rr??



http://www.aph-performance-engineering.com

Marmalade one would hope...

_________________
08 Specialized Langster

It's easier to get the 3mm shocker adjust that way for me, it's the only thing though.

It's great to have quick access to it though ha ha.

_________________
Ride Safe & Stay between the hedgerows.